Johnson-level-tool-mfg RAS-1 Manual do Utilizador descarregar pdf (Página 23)

STEP 3. BOTTOM OR TAIL PLUMB CUT: Measure down the

topofthevalleyrafterfromtheSEATPLUMBMARKand

markthetaillength(inourexample:2'8-7/8").Besureto

add the miter allowanceinthemeasurement,ifused(see

Figure 13). Make the bottom plumb mark with the square

in the normal manner.

STEP 4. RAFTER PATTERN CUTS: To make the top and

bottomcuts,tiltthesawat45°(seeFigure13).Alsomake

theseatmitercuts.Nowchangethesawtiltto90°forthe

horizontal seat cut. You may want to check for proper ﬁt

and use this rafter as a pattern for the other valley rafters.

FIG. 12 View of Valley Rafter Layout.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 66 67

Sem comentários

Johnson-level-tool-mfg RAS-1 Manual do Utilizador Página 23